SDI fabsurplus.com is pleased to announce the availability of the following listed used SCHMID GCH Glass high quality cleaning system.
Please click on the "Get Quote" button at the end of the GCH description, if you'd like to get a quotation, photos and specifications of this Glass high quality cleaning system, and your request for this equipment will be forwarded to our SDI sales representatives automatically.
This SCHMID GCH Glass high quality cleaning system is available for immediate sale.
Crating, refurbishment and delivery for this equipment can be quoted on request.
SDI ID: | 100358 |
---|---|
Manufacturer: | SCHMID |
Model: | GCH |
Description: | Glass high quality cleaning system |
Version: | Solar |
Vintage: | 31.05.2008 |
Quantity: | 2 |
Sales Condition: | as is where is |
Lead Time: | immediately |
Sales Price (each): | Inquire |
Comments: | Year of Manufacturing: 2008 Chemistry Type: Deconex PV 110 GCH – Technical data
General characteristics Machine type Glass high quality cleaning system Manufacturer– Schmid GmbH Dimensions Length (mm) 8200 Width (mm) 3300/2220/1945/1730 Height (mm) 1090
Max. operational width (mm) 1320 Operational height (mm) 900 +/‐ 15 Operation direction from left to right
Power supply Operational voltage (V / Hz) 400 V / 60 Hz Control voltage (V) 24 V DC Total switched power (kW) 69 kW Total switched current (А) 160 A/phase
Emission Noise level (measured acc. to DIN 45635 on a stand-alone machine) (dB(A)) 74,9 Drive Conveyor speed (m/min) 0,2 – 6 General description The brushing machine is a fully automatic system that can be used as follows: - Cleaning glass plates. - It is done horizontally from the lying workpieces. The workpieces themselves determine the entire workflow, which is controlled by a programmable microprocessor. The modular design of the brush machine consists, as a rule, of the following components: -Roller feed -Brush station - Flushing unit -Drying device -Roller unloading device -Separate control cabinet A control cabinet is located close to the machine. The feed speed of the machine can be continuously adjusted using a control potentiometer in the range from 0.2 to 6 m / min and controlled using the corresponding digital indicator. The brushing machine of the combi-brush series, while maintaining the same working width, is fully integrated into all Schmid equipment. The loading and unloading can be done manually or in combination with all the Schmid manipulators. The length of the modules is from 625 mm or many times longer, which allows you to accurately adapt the machine to customer needs and production needs. Retrofitting, modernization or separation of the machine can be made any time. Only high-quality PVC and stainless steel are used as processed materials. During processing, the workpieces are transported between the rotating rolls. The brush pressure can vary depending on the distance between the brush and the workpiece. For each purpose, you can use brushes from different materials. The brush replacement device allows you to change brushes quickly and effortlessly. The existing washing module and tank module allow the use of combined flushing with clean water, circulating water and cascade (back) flushing. Large tank modules use the same pumps as brush modules. The dryers used are equipped with high-performance fans and optionally by thermostatically controlled air heating, so they are designed for high feed rates. All modules are delivered in two operation directions. |
Get Quote |
The data provided herein is not an offer capable of acceptance.
The information contained on this page is, to our knowledge and information, accurate, but it may contain errors and therefore we do not warrant the completeness or accuracy of the information contained on this page.
Any offer by you to purchase the equipment described on this page shall be subject to our standard terms and conditions of sale.
Established in 1998, SDI has now built up an international network of sales agents and offices.
SDI has evolved into one of the largest semiconductor equipment brokerages by concentrating on professionalism, customer service and value for money.
Ask SDI fabsurplus.com! If you can't find what you need, or are looking for a specific piece of semiconductor equipment. Let us know what type of semiconductor manufacturing equipment you would like to buy, and we will conduct a search for what you are looking for.
Click here for all contact information.
SDI-Fabsurplus Srl Italy, and SDI-FABSURPLUS LLC. N. America
SDI fabsurplus.com works by using the latest technology to continuously monitor the used equipment market place.
If you want to join our mailing list, please send click on the button below to send an e-mail to subscribe
to our monthly equipment news update.
Request monthly equipment news
We'd love to get your feedback about our website and our services!
Fill in the Feedback Form