SDI fabsurplus.com is pleased to announce the availability of the following listed used AKT / Applied Materials AKT Applied G5 PECVD 5.7 PECVD.
Please click on the "Send More Details" button at the end of the AKT Applied G5 PECVD 5.7 description, if you'd like to get more details, photos and specifications of this PECVD, and your request for this equipment will be forwarded to our SDI sales representatives automatically.
This AKT / Applied Materials AKT Applied G5 PECVD 5.7 PECVD is available for immediate sale.
Crating, refurbishment and delivery for this equipment can be quoted on request.
|Manufacturer:||AKT / Applied Materials|
|Model:||AKT Applied G5 PECVD 5.7|
|Sales Condition:||as is where is|
In Fab - Disconnected, Decontaminated, Deinstalled DISSASSEMBLY/DEINSTALLATION WILL BE PERFORMED BY APPLIED MATERIALS AT NO COST TO THE BUYER. RIGGING AND CRATING IS THE RESPOSIBILITY OF THE BUYER.4 CH. 15 KAX TRIPLEParameterAMAT specification (10/5/15)Wafer size156mm x 156 mm (239cm2) substrates transported in a carrierCarrier sizeG6 (1500mm x 1850mm) carrier capable of carrying >/=99 wafer/carrierG5 (1200mm x 1300mm) carrier capable of carrying >/=49 wafer/carrierHandlingG6: Robot max payload 60Kg: Capable of handling 5mm graphite carrier (Carrier/wafer 24kg + EE 31Kg)� >12 month lifetime for robot componentsG5: Robot max payload 50Kg: Capable of handling 5mm graphite carrier (Carrier/wafer 14kg + EE 27Kg)� >12 month lifetime for robot components�DepositionAmorphous silicon 40-150 angstrom on waferThru-put per systemG5: >/=70 carriers/hr - 4 chamber config, 1 process step with 144s in recipe time.G6: >/=70 carriers/hr - 5 chamber config, 1 process step with 221s in recipe time.Thru-put per LLG6 (TSSL): >/= 70 carrier/hr with venting time < 40secG5 (TSSL): >/= 70 carrier/hr with venting time < 40secProcess sequencesequential run for i and n layer, and individual run for othersSubstrate Exit Temperature<100CBase pressure<10m Torr (AMAT's STD pump base pressure, in process chambers)CVD Chamber Rate of Rise<1.0mTorr/min,� AMAT STDPressure control0.2 to 5TorrDeposition Requirements for a-Si layerParameterAMAT for G5 toolGas flowSiH4(high), SiH4(low), H2(high), H2 (low), B2H6/H2, CH4, Ar, NF3, N2Generator PowerMax power 3KW, plasma sustainable at the power density > 150W/m2 for 40MHz�Deposition Temperature150C-300CHeater Temperature Uniformity< +/-10C (AMAT STD spec, on glass w TC)Deposition Requirements for a-Si layerParameterAMAT for G6 toolGas flowSiH4(high), SiH4(low), H2(high), H2 (low), PH3/H2, Ar, NF3, N2, B2H6/H2 (Total 9)Generator PowerMax power 5KW, plasma sustainable at the power density > 150W/m2 for 13.56MHz�Deposition Temperature200-300CTemperature Uniformity< +/-10C (AMAT STD spec, on glass)
Send Me More Details about this item.
The data provided herein is not an offer capable of acceptance.
The information contained on this page is, to our knowledge and information, accurate, but it may contain errors and therefore we do not warrant the completeness or accuracy of the information contained on this page.
Any offer by you to purchase the equipment described on this page shall be subject to our standard terms and conditions of sale.
Established in 1998, SDI has now built up an international network of sales agents and offices.
SDI has evolved into one of the largest semiconductor equipment brokerages by concentrating on professionalism, customer service and value for money.
Ask SDI fabsurplus.com! If you can't find what you need, or are looking for a specific piece of semiconductor equipment. Let us know what type of semiconductor manufacturing equipment you would like to buy, and we will conduct a search for what you are looking for.
Click here for all contact information.
SDI-Fabsurplus Srl Italy, and SDI-FABSURPLUS LLC. N. America
SDI fabsurplus.com works by using the latest technology to continuously monitor the used equipment market place.
If you want to join our mailing list, please send click on the button below to send an e-mail to subscribe to our monthly equipment news update.
Request monthly equipment news
We'd love to get your feedback about our website and our services!
Fill in the Feedback Form