SDI fabsurplus.com is pleased to announce the availability of the following listed used BTU TCA92-5-60N54 Transheat Furnace.
Please click on the "Send More Details" button at the end of the TCA92-5-60N54 description, if you'd like to get more details, photos and specifications of this Transheat Furnace, and your request for this equipment will be forwarded to our SDI sales representatives automatically.
This BTU TCA92-5-60N54 Transheat Furnace is available for immediate sale.
Crating, refurbishment and delivery for this equipment can be quoted on request.
The BTU TCA Series Transheat Furnace is a continuous conveyor furnace used for applications such as Brazing, Packaging, Heat Treating and Soldering
Entrance with Baffle Assembly, N2 Curtain and Venturi Exhaust 584mm
Entrance Vestibule 279mm
Zone 1 305mm
Zone 2 305mm
Zone 3 305mm
Zone 4 305mm
Heat Barrier 70mm
Zone 5 305mm
Heat Barrier 70mm
Exit vestibule 279mm
Free Cooling w/ Separation Joint 152mm
Water Cooling Zone 1 457mm
Water Cooling Zone 2 w/ Eductor Cooling 914mm
Exit with Baffle Assembly and N2 Curtain 533mm
Frame allowance 248mm
APPROXIMATE WORKING LENGTH 4.8m
Approximate Overall Furnace Width is 838mm (33”)
Loading and Unloading
Loading table is 762 mm wide, length is 610mm
Unloading table is 762 mm wide, length is 610mm
APPROXIMATE TOTAL FURNACE LENGTH 6m
Case cooling is provided to exhaust heat from within the furnace frame.
The water-cooling section consists of a stainless steel muffle with copper tubes on the outside.
Maximum temperature rating : 700oC
Operating temperature range : 250 - 650oC
Number of controlled heat zones : 5
Working Dimensions : 229 mm (9 inch) wide x 51mm
(2 inch) clearance above the belt
Heated Length : 1.5M (60 inches)
Belt Height Above the Floor : 914mm (36 inches)
The muffle heated section is made of Stainless Steel 304L a highly conductive alloy thoughout the process chamber and 304 stainless steel is utilized for the curtain and cooling sections.
Heaters are manufactured by BTU utilizing iron, chrome, aluminum alloy coil. Heaters are located on the top and bottom of the process chamber.
The data provided herein is not an offer capable of acceptance.
The information contained on this page is, to our knowledge and information, accurate, but it may contain errors and therefore we do not warrant the completeness or accuracy of the information contained on this page.
Any offer by you to purchase the equipment described on this page shall be subject to our standard terms and conditions of sale.
Established in 1998, SDI has now built up an international network of sales agents and offices.
SDI has evolved into one of the largest semiconductor equipment brokerages by concentrating on professionalism, customer service and value for money.
Ask SDI fabsurplus.com! If you can't find what you need, or are looking for a specific piece of semiconductor equipment. Let us know what type of semiconductor manufacturing equipment you would like to buy, and we will conduct a search for what you are looking for.
Click here for all contact information.
SDI-Fabsurplus Srl Italy, and SDI-FABSURPLUS LLC. N. America
SDI fabsurplus.com works by using the latest technology to continuously monitor the used equipment market place.
If you want to join our mailing list, please send click on the button below to send an e-mail to subscribe to our monthly equipment news update.
Request monthly equipment news
We'd love to get your feedback about our website and our services!
Fill in the Feedback Form