SDI fabsurplus.com is pleased to announce the availability of the following listed used Baccini Screen Printer 2 screen printer. This Baccini Screen Printer 2 screen printer is available for immediate sale. Please click on the "Send More Details" button if you'd like to get more details, photos and specifications of this screen printer and your request will be forwarded to our customer representatives automatically. Crating, refurbishment and delivery can be quoted on request.
|Model:||Screen Printer 2|
|Sales Condition:||as is where is|
|Sales Price (each):||45,000 USD|
Location: The warehouse, Port Klang, Malaysia.
Integrated printers and dryers for the production of 156 mm square solar cells.
The integrated dryers and printers are fed via a Jonas and Redmann loader.
The J and R loader actually loads onto a Chip and Crack detection system, which then feeds into the first printer.
Loaders: Printer 1 Dryer 1 Printer 2 Dryer 2 Printer 3
Operational prior to de-installation
In-line with Baccini Solar Cell Line 156mm
Single Lane process.
WEIGHT AND DIMENSIONS: 155 cm x 285 cm x 230 cm (h) , weight 1000 kg
Attached also is the layout of the complete line.
The loader for the line is manufactured by Jonas and Redmann.
The 3rd printer unloaded directly onto the input table of the Centrotherm Fast Firing Furnace, which was the next element in the line.
The printers and dryers were re-furbished, re-located and re-installed by Applied Baccini in 2011.
Attached is the install report.
Following re-installation, only a very small quantity of pilot production was run.
The line was de-installed in february 2012.
The line has been dis-assembled and cleaned.
It is now in storage in Port Klang, Malaysia.
This system is used for the production of solar cells by the silk-screen printing process.
This process allows the production of:
The loading of the system is carried out by a conveyer with vision system. Wafer cells arrive from a conveyer to a Baccini
conveyer and here, by a vision system the cells are aligned and put on a walking beam, by adjusting the speed of the first
conveyer you can obtain loading heaps of 4 or 6 cells.
Printing head resolution is approx 0.5nm
Installation environment: 18 - 25 deg C
Max relative Moisture: 70%
Overall Size: Base: 15,995 x 2451.5 mm
-Cell Size: 100x100mm,125x125mm,150x150mm
-Cell Thickness min-max 200nm - 330
-Max cells working per hour: 1,125 cells/hr
(Squeegee speed: 100mm/sec)
-Max cells breakage percentage: max 0.5%
-Line availability: >95%
D) First Printing Machine
-Max horidontal squeegee stroke: 240mm
-Squeegee speed min-max: mm/s 0-333
-max vertical squeegee stroke: 33mm
-squeegee pressure N 0-150
-squeegee pressure accuracy: +/- 0.2N
-Maximum printing area: 210x210mm
-maximum printing screen size: 380x460mm
E) Drying vertical oven
-Number of cells per each shelf n.5
-total number of shelves n.52
-number of temperature control zones n.4
-settled temperature tolerance +/- 5deg C
-max operating temperature in the oven: 250deg C
-min operating temperature in the oven: 40deg C
-paste levelling and pre-heating time: min.2
-drying time min.5
-cooling time min.2
-electrical feeding 400V +/- 10% 3-Phase+PE(3 phases wires +1 ground PE), 50hz
-installed electrical power: 32KW
-compressed air supply: Bar 6
-Compressed air consumption nl/min 250
-Vacuum supply: mm Hg 600
-Vacuum suction capacity: mc/h 25
Breakages in the quality inspection unit can detect splinters and crazes presence,
with a minimum opening of 50x50nm are detected. Defective cells are automatically rejected.
Send Me More Details about this item.
The data provided herein is not an offer capable of acceptance.
The information contained on this page is, to our knowledge and information, accurate, but it may contain errors and therefore we do not warrant the completeness or accuracy of the information contained on this page.
Any offer by you to purchase the equipment described on this page shall be subject to our standard terms and conditions of sale.
Established in 1998, SDI has now built up an international network of sales agents and offices.
SDI has evolved into one of the largest semiconductor equipment brokerages by concentrating on professionalism, customer service and value for money.
Ask SDI fabsurplus.com! If you can't find what you need, or are looking for a specific piece of semiconductor equipment. Let us know what type of semiconductor manufacturing equipment you would like to buy, and we will conduct a search for what you are looking for.
Click here for all contact information.
SDI-Fabsurplus Srl Italy, and SDI-FABSURPLUS LLC. N. America
SDI fabsurplus.com works by using the latest technology to continuously monitor the used equipment market place.
If you want to join our mailing list, please send click on the button below to send an e-mail to subscribe to our monthly equipment news update.
Request monthly equipment news
We'd love to get your feedback about our website and our services!
Fill in the Feedback Form