Salon Teknopaja OY PWB Printed Wire Board Level Drop Tester with Solder Joint Reliability tester for sale

SDI fabsurplus.com is pleased to announce the availability of the following listed used Salon Teknopaja OY PWB Printed Wire Board Level Drop Tester with Solder Joint Reliability tester.
Please click on the "Get Quote" button at the end of the PWB description, if you'd like to get a quotation, photos and specifications of this Printed Wire Board Level Drop Tester with Solder Joint Reliability tester, and your request for this equipment will be forwarded to our SDI sales representatives automatically.
This Salon Teknopaja OY PWB Printed Wire Board Level Drop Tester with Solder Joint Reliability tester is available for immediate sale.
Crating, refurbishment and delivery for this equipment can be quoted on request.

Salon Teknopaja OY PWB Equipment Details

SDI ID:

79602

Manufacturer:

Salon Teknopaja OY

Model:

PWB

Description:

Printed Wire Board Level Drop Tester with Solder Joint Reliability tester

Version:

SMT

Vintage:

31.05.2004

Quantity:

Sales Condition:

as is where is

Lead Time:

immediately

Sales Price:

Inquire

Comments:

-Deinstalled, warehoused.
-In working condition
-See photos for details
-Available for immediate consignment
-Can be inspected by appointment
-Located in Avezzano 67051 Italy

-For drop testing of cell phone PCBs
-The drop tester determines the reliability of the PWC (Printed wiring board) against mechanical shock.
-Max drop height 1600 mm
-Test control In calibration mode controlled by touch screen; in testing
mode controlled by Windows PC and the Event Detector software
-Catcher which eliminates the rebound, also possible to switch off
-Test method by Jedec standard and others. Tested with the following
values of acceleration peak (G)/ pulse duration (ms): 2900 G/ 0.3 ms,
2000 G/ 0.4 ms and 1500 G/ 0.5 ms)
-Size of the standard test board Maximum 170 mm x 90 mm
-Safety CE Compliant
-Includes Analysis Tech 128 STD Event Detector
-Manufactured by:
Salon Teknopaja OY
Peramiehenkatu 12
24100 Salo
Finland

Board (PCB) Level Drop Test Method of Components for Handheld Electronic Products

for IC component
for audio etc component

- Meet Jedec Standard JESD22-B111

- Mechanical Shock Pulse to 5000 G peak acceleration

- User friendly interface - Easy to use

- Supports continous measurement and automatic repeatability efficiently

- Designed for Hard Professional Use

Shipping Information:

Dimensions: 2100 mm x 400 mm x 300 mm weight 00 kg

Information about the Analysis Tech 128 STD Event Detector:-

STD Event Detectors:
Electrical Monitors for
Solder Joint Reliability Testing

The STD Series Event Detectors offer test specifications associated with solder joint reliability testing but can also be used for testing other types of interconnects accordingly. Like other Event Detectors, the STD series provides continuous transient resistance detection referenced to a selected threshold resistance with a high degree of electrical noise immunity.

The STD SThe STD Event Detectors feature WinDatalog Software for data collection and analysis.

256std-pic2

Features

▪	Threshold Resistance Range: 100 to 5,000 ohms, user adjustable
▪	Minimum Event Duration: 200 nanoseconds, fixed
▪	Channel Sense Current: less than 1.2mA, fixed
▪	Systems has 128 channels
▪

Features Included with All Event Detectors

▪	WinDatalog, data collection/analysis software
▪	Temperature Module (with communication cable and connectors)
▪	RS232C serial data transmission to PC computer (cable included)
▪	Linkable with other Event Detectors (linking cable required)
▪	Test input cables (10 foot length)
▪

The STD Event Detectors simultaneously monitor individual continuity loops with independent sense-currents flowing in each loop. The detection speed and resistance threshold range make the STD series ideal for solder-joint reliability studies. Such tests typically use "daisy chain" solder joints in wire-bonded packages mounted on special test-PCBs. These test boards are then thermally cycled, vibrated, shock-dropped, or mechanically flexed while being monitored with Event Detectors. The initial, short duration, intermittent failures of the joints are detected and recorded automatically with the cycle number, time, and date. With this technique, variations in interconnect design and soldering process parameters can be evaluated by direct comparison of test results. This type of electrical monitoring has proven to be far more reliable and less expensive than visual detection of solder joint failure.

STD Event Detectors are normally supplied with a single, common Threshold Resistance (Vref) adjustment for all channels. A Multiple Threshold Resistance Adjustment option is available for STD Event Detectors that provides a separate resistance threshold setting for each bank of 64 channels. STD Event Detectors can also use the STD Wiring Harness for convenient sample wiring and setup.

Electrical Specifications

Threshold Resistance Range	100 to 400 ohms (low), 300 to 5000 ohms (high)
Channel Current-Source Max Compliance	0.6 volts(low) / 9.8 volts (high)
Maximum Channel Sense Current	1.2 mA maximum
Typical Threshold Resistance Tolerance	+/- 4%
Maximum Threshold Resistance Tolerance	+/- 10%
Nominal Event Duration Sensitivity	200 nS
Typical Minimum Event Sensitivity Tolerance	+/- 10%
Supply Voltage	120VAC, 60Hz, 3 amps (unless otherwise specified)
Input Cables	Standard: PVC ribbon cable, 105 °C max Optional: Hi-temperature cable, 200 °C max
Dimensions	6.5" H x 16.5" W x 12" D
Weight	20 lbs

STD Event Detector Systems include: WinDatalog Software, test input cables (10 ft long, PVC insulated) single-ended, serial communication cable, complete instruction manual,

Get Quote

Attachments: 5 Files

Not the item you were looking for?

If the PWB from Salon Teknopaja OY is not the item you need, you can also:

look at all the items on sale in the item product categories:
- Equipment owned by SDI
- SMT
You can search for more items from manufacturer Salon Teknopaja OY,
You can search for any other PWB we may have for sale.
You can use our search box for semiconductor equipment for sale.

Ask SDI fabsurplus.com!

If you are looking for a specific piece of semiconductor equipment let us know what type of semiconductor manufacturing equipment you would like to buy, and we will conduct a search for what you are looking for.

Inquiry

The data provided herein is not an offer capable of acceptance.
The information contained on this page is, to our knowledge and information, accurate, but it may contain errors and therefore we do not warrant the completeness or accuracy of the information contained on this page.
Any offer by you to purchase the equipment described on this page shall be subject to our standard terms and conditions of sale.

SDI-Fabsurplus has worked with determination and tenacity over the last 25 years to develop one of the largest semiconductor equipment databases and the best software.

We strive to provide our customers with the best equipment at the lowest prices using our unparalleled network of industry contacts.

We are truely devoted to become your professional , customer-oriented , efficient and value-for-money semiconductor equipment and parts source.

Salon Teknopaja OY PWB Printed Wire Board Level Drop Tester with Solder Joint Reliability tester for Sale

Salon Teknopaja OY PWB Equipment Details

Not the item you were looking for?

Ask SDI fabsurplus.com!