SDI fabsurplus.com is pleased to announce the availability of the following listed used Advantest T5383 Automated Test System.
Please click on the "Send More Details" button at the end of the T5383 description, if you'd like to get more details, photos and specifications of this Automated Test System, and your request for this equipment will be forwarded to our SDI sales representatives automatically.
This Advantest T5383 Automated Test System is available for immediate sale.
Crating, refurbishment and delivery for this equipment can be quoted on request.
|Description:||Automated Test System|
-Currently de-installed and warehoused
-Can be sold in "as is" conditions, or with power up testing and installation.
-Please send us an inquiry to know more details.
Detailed configuration of the system which is available for purchase:-
The specifications contained herewith specify the functions and compositions of the specific system.
The description of the specifications is intended to make the individual specification of respective system clear, and T5383 MEMORY TEST SYSTEM PRODUCT DESCRIPTION provided separately shall be referred to for performance.
The specifications herewith exclusively apply in preference to the PRODUCT DESCRIPTION manual in case that any differences exist.
2-1. Measurement section Test station No.1
2-1-1. Channel configuration
Full 6144ch: Dr: 2304ch, I/O: 2304ch, LVDr: 1536ch
2-1-2. Trigger terminal 1set
2-1-3. FC 144CH
2-1-4. DC Test Unit 192CH/STN
2-1-5. ADD LVDr (94CHX4) 1set
2-1-6. Programmable Power Supply
PPS EXTENSION UNIT (64CHX9) 1set
2-1-7. Timing generator
-Number of timing edges ACLK : 128edges BCLK : 128edges
CCLK : 128edges DRECLKL : 128edges DRECLKT : 128edges STRB : 4edges WSTRB : 1edge
-Timing set 16
2-1-8. Pattern Generator
-ALPG X register - 24bits, Y register - 24bits
2-1-9. Driver output reference level (VIH,VIL)
2-1-10.Comparator input reference level (VOH,VOL)
2-1-11.Terminator voltage (VT)
2-1-12.Programmable load (PL)
2-1-13.Failure analysis memory (16Gbits/board)
-MRA Station configuration FMRA 1-12 RCPU 1-6
2-1-15.Flash Memory Parallel Test Option
2-2. Control section
Tester processor (TP7)
-80GB X 1 Hard disk
-3.5 Inch Floppy disk drive (1.44MB)
Additional Memory (1GB)
3. Safety section (Standard)
3-1. Emergency off switch(EMO switch) without key 1set
3-2. Photoelectric smoke detector 1set
4-1. Standard accessories 1set
4-2. Testing accessories
4-2-1. Temporary TH Stand H9-911009 1set
4-2-2. Cable duct L
4-2-3. Extender card
4-2-4. Mother board lifter connect
4-2-5. Prober connection kit
4-2-6. Mother board
4-2-7. DIAG PC
4-2-8. Mother board shipping cart
4-2-9. Additional EMO switch
5. System ratings
5-1. Power line voltage
-180 - 220 VAC (50A 3-phase power source) 4lines
5-2. Power consumption (Max)
-200 VAC 54KVA
5-3. Air Requirement
Each test station requires following air sources for the performance board is locking and unlocking by air pressure.
-Air consumption (Dry air) 0.49-0.69MPa
5-4. Cooling Water
5-4-1. Cooling Water Supply Conditions
-Temperature Range 7 to 20 Degree C
-Water Feed Rate 38 to 107 L/min or more
-Supplied Water Pressure 0.2 to 0.7MPa Note : The water quality depends to the standard of the Japan
Refrigeration and Air Conditioning Industry Association (JRA-GL-02-1994).
There are mutual relation up to the temperature and flowing quantity.
5-4-2. Pipe Coupling Conditions
-Cooling Water entrance Bore diameter Rcl 1/4(with a valve) 1place
-Cooling Water exit Bore diameter Rcl 1/4(with a valve) 1place Please prepare the hose for the cooling water by yourself.
5-5. Weight (Approx.) 2600Kg
6. Suppression of radio frequency interference option
FCC Part 15 0set
CE Mark (Include FCC Part 15 Rules) 1set Note;The system has been found to comply with Part 15 of FCC Rules for
Class A computing devcice.
7. Place of installation
Qimonda Dresden GmbH & Co. OHG Koenigsbruecker Str. 180
01099 Dresden Germany
8. Certification of calibration
8-1. for test system 1set
8-2. for digital volt meter 1set
9. Custom Specifications
9-1. 2nd Ethernet IP Address 172.20.xxx
MODEL NAME PLATE DESCRIPTION:T5383 QIM1
NOTE: FONT & COLOR ARE NOT SELECTABLE.
POWER LINE FREQUENCY 50HZ
Connective type : UF3000EX
11. Software and Manuals
11-1. FutureSuite Software PNFS00-00LZWS 1set
-SuSE Linux Professional 9.2 Media kit
11-2. Optional Software
11-2-1. WFBRead00 PWFR00-83LDIS 1set
11-2-2. FutureSuite MRA PFMR00-00LDIS 1set 11-3. Manuals
Send Me More Details about this item.
The data provided herein is not an offer capable of acceptance.
The information contained on this page is, to our knowledge and information, accurate, but it may contain errors and therefore we do not warrant the completeness or accuracy of the information contained on this page.
Any offer by you to purchase the equipment described on this page shall be subject to our standard terms and conditions of sale.
Established in 1998, SDI has now built up an international network of sales agents and offices.
SDI has evolved into one of the largest semiconductor equipment brokerages by concentrating on professionalism, customer service and value for money.
Ask SDI fabsurplus.com! If you can't find what you need, or are looking for a specific piece of semiconductor equipment. Let us know what type of semiconductor manufacturing equipment you would like to buy, and we will conduct a search for what you are looking for.
Click here for all contact information.
SDI-Fabsurplus Srl Italy, and SDI-FABSURPLUS LLC. N. America
SDI fabsurplus.com works by using the latest technology to continuously monitor the used equipment market place.
If you want to join our mailing list, please send click on the button below to send an e-mail to subscribe to our monthly equipment news update.
Request monthly equipment news
We'd love to get your feedback about our website and our services!
Fill in the Feedback Form