fabsurplus.com




20 MWp Solar Qty 2 Module Manufacturing Lines for Sale


SDI fabsurplus.com is pleased to announce the availability of the following listed used 20 MWp Solar Qty 2 Module Manufacturing Lines. This 20 MWp Solar Qty 2 Module Manufacturing Lines is available for immediate sale. Please click on the "Send More Details" button if you'd like to get more details, photos and specifications of this Qty 2 Module Manufacturing Lines and your request will be forwarded to our customer representatives automatically. Crating, refurbishment and delivery can be quoted on request.


20 MWp Solar Equipment Details

SDI ID: 92018
Manufacturer: 20 MWp
Model: Solar
Description: Qty 2 Module Manufacturing Lines
Version: 450 cm x 230 cm
Vintage: 01.06.2008
Quantity: 1
Sales Condition: as is where is
Lead Time: immediately
Sales Price (each): 280,000 EUR
Comments:

Please find hereafter the information of 2 production lines of  2-Bus Bar solar panels to sell.

 

The lines are still installed, and regularly maintained, but not currently producing. We reccommend to inspect the equipment to fully understand the  conditions of the machines.

Dismantling and re-installation service is available.

 

The first line was manufactured and acquired in 2007 and starts to produce on 2008

And the second line was acquired on 2008.

In 2009 and 2010 the lines were in full production.

 

At the end of 2011 the production was ceased; problems of decrease of demand.

And the lines start to produce again from June 2012 to September 2012, when they have ceased to produce definitively.

 

The acquired technology is SPIRE SOLAR, a partnership between SPIRE and NISSIHINDO, and the oven for lamination is NISSIHINDO

 

In full production are required about 15 people

 

Capacites:

 

Each line has a capacity of 12 MGW, so total capacity is 24 MGW.

The Cell sorter has a capacity of 20 MGW and the simulator of 72 MGW (serves for 6 lines)

 

The assemblers can produce around 600 cells/hour (depending obviously on the sizes of panels).

 

In the laminates the maximum size are panels of 450 cm x 230 cm.

 

Please find attached an excel with the inventory of the machinery and pics of the equipments.

 

The lines are fully automated , except the last step (Frame construction).

 

 

 Lot  Qty Type of Machinery  Manufacturer Model YR  SPECIFICATIONS FUNCTION DESCRIPTION
1 1 Cell sorter SPIRE CORP. Cell Sorter 2007 - V 220 - Hz 50/60 - PH 1 - 8.8 kWA This equipment, by sunlight test simulated (xenon lamp with optical filters meeting ASTM specifications), classifies photovoltaic cells according to their electrical performance, and groups them homogeneously in piles of 10. Equipped with computer that collects and stores data from each cell and produces IV curve. Cells were loaded and unloaded manually.
2 1 Guillotine for EVA film     2007 n/L Equipment for cutting film of thermoplastic or thermo-hardenable or polymer film (EVA). These layers of EVA are later used to seal and waterproofing the cells contained in the modules. The equipment has a coil feeder and automatic cutting. Equipped with devices and drivers TOLOMATIC
3 1 Wire ribbon cutter EUBANKS 4600 - 03 H 2007 189 H - V 110/120 - Hz 50/60 - 10/6 A Wire Cutting equipment "Ribbon" destinated to interconnect cell chains
4 1 String welder and assembler SPIRE CORP. Assembler 6000 2007 - V 200/240 - Hz 50/60 - PH 3 - 4.5 kWA SPIRE LINE 2007 - In a first phase it aligns the cells automatically and connects them welding with wire "Ribbon" and forming strings (chains of interconnected cells) and finally measures the curve IV of the chains. In a second phase, the glass sheet is manually placed on the ball table and on this a layer of EVA. Then, automatically, the equipment places on the sheet the strings that form the module.
5 1 Inspection Station SPIRE CORP.   2007 n/L SPIRE LINE 2007 - consists firstly of a roller table on which the sheet slides with the strings mounted on it. Equipped with backlight that allows inspections of welds and the correct placement of the strings. Then moves on a second table of balls and pads where the strings will be, manually, welded toghether.
6 1 Laminator NISSHINBO Industries INC. Lam 1722 N 2007 - Weight 4500 kg - Air supply 0.5 Mpa / 150 NL/min - Input Volt. 3 phase 200 v - Hz 50/60 - 130 A SPIRE LINE 2007 - This equipment has a previous sliding tapestry where the module is placed and manually covered with a layer of EVA on the face missing it. After that the module slides into the processing chamber (temperature / pressure / vacuum), for modules up to 4500 mm x 2300 mm.
7 1 String welder and assembler SPIRE CORP. Assembler 6000 2008 - V 200/240 - Hz 50/60 - PH 3 - 5 kWA SPIRE LINE 2008 - In a first phase it aligns the cells automatically and connects them welding with wire "Ribbon" and forming strings (chains of interconnected cells) and finally measures the curve IV of the chains. In a second phase, the glass sheet is manually placed on the ball table and on this a layer of EVA. Then, automatically, the equipment places on the sheet the strings that form the module
8 1 Inspection Station SPIRE CORP.   2008 n/L SPIRE LINE 2008 - consists firstly of a roller table on which the sheet slides with the strings mounted on it. Equipped with backlight that allows inspections of welds and the correct placement of the strings. Then moves on a second table of balls and pads where the strings will be, manually, welded toghether.
9 1 Laminator NISSHINBO Industries INC. Lam 1834 N 2008 - Weight 6500 kg - Air supply 0.5 Mpa / 150 NL/min - Input Volt. 3 phase 200 v - Hz 50/60 - 194 A SPIRE LINE 2008 - Same model but more powerfull than the previous of 2007 - This equipment has a previous sliding tapestry where the module is placed and manually covered with a layer of EVA on the face missing it. After that the module slides into the processing chamber (temperature / pressure / vacuum), for modules up to 4500 mm x 2300 mm.
10 1 Station for installation of connector boxes SPIRE CORP.   2007 n/L It consists of a ball table and the corresponding tools to install and set in the module the exterior connector box by manual welding
11 1 Frame press SPIRE CORP. Frame Press PH1 2007 - V 220 - PH1 SPIRE LINE 2007 - Table equipped with hydraulic joysticks to frame pressing and sealing the modules with aluminium profiles and angles
12 1 Frame press Grupo METASOL   2008 V 220 SPIRE LINE 2008 - Table equipped with hydraulic joysticks to frame pressing and sealing the modules with aluminium profiles and angles. Made by local company to be like that of SPIRE.
13 1 Simulator Hi-Pot Test SPIRE CORP. SIM 4600 SLP 2007 - V 200 - Hz 60 - 2 kWA - PH1 This equipment performs the quality control of modules, simulating working conditions of sun and weather, connecting probes to the module and collecting and measuring performance characteristics of this IV curve. After, this information is printed on label and adhered to the module (ASTM Standards).
14 1 Aluminium profile cutting machine TRONZADORAS MG Mach 450 KB PE 2007   Cutting machine for aluminum profiles, circular saw, with doble head.
15 1 Punching and Die-cutting machine       n/L Equipment designed to produce angles and flanges of aluminum frames for frame the modules. It has 4 heads working in parallel.
16 1 Horizontal washer BOHLE BOW1200H 2007 - V 380 - 9 kW Horizontal washer of modules

 

Categories:
Attachments: 31 Files
Send Me More Details about this item.



Not the item you were looking for?

Ask SDI fabsurplus.com!

If you are looking for a specific piece of semiconductor equipment let us know what type of semiconductor manufacturing equipment you would like to buy, and we will conduct a search for what you are looking for.

Inquiry

The data provided herein is not an offer capable of acceptance.
The information contained on this page is, to our knowledge and information, accurate, but it may contain errors and therefore we do not warrant the completeness or accuracy of the information contained on this page.
Any offer by you to purchase the equipment described on this page shall be subject to our standard terms and conditions of sale.

sdi logo

Established in 1998, SDI has now built up an international network of sales agents and offices.

SDI has evolved into one of the largest semiconductor equipment brokerages by concentrating on professionalism, customer service and value for money.

Read more about us





View all Complete Facilities for sale

View all Solar Cell and Module Equipment for sale

Search for 20 MWp items for sale

Search for Solar items for sale


Ask SDI fabsurplus.com! If you can't find what you need, or are looking for a specific piece of semiconductor equipment. Let us know what type of semiconductor manufacturing equipment you would like to buy, and we will conduct a search for what you are looking for.

Inquiry



sdi logo

Click here for all contact information.
SDI-Fabsurplus Srl Italy, and SDI-FABSURPLUS LLC. N. America




SDI fabsurplus.com works by using the latest technology to continuously monitor the used equipment market place.
If you want to join our mailing list, please send click on the button below to send an e-mail to subscribe to our monthly equipment news update.

Request monthly equipment news





We'd love to get your feedback about our website and our services!
Fill in the Feedback Form