SDI fabsurplus.com is pleased to announce the availability of the following listed used Thermo Cube 600L Liquid to Liquid Recirculating Chiller.
Please click on the "Get Quote" button at the end of the 600L description, if you'd like to get a quotation, photos and specifications of this Liquid to Liquid Recirculating Chiller, and your request for this equipment will be forwarded to our SDI sales representatives automatically.
This Thermo Cube 600L Liquid to Liquid Recirculating Chiller is available for immediate sale.
Crating, refurbishment and delivery for this equipment can be quoted on request.
|Description:||Liquid to Liquid Recirculating Chiller|
|Sales Price (each):||Inquire|
Unused ThermoCube 600L chillers in original packaging
Supplier: Solid State Cooling Systems
Supplier Part Number: 10-600L-1G-1-R2-EF-VD-AR-307A
Product Description: ThermoCube 600L Liquid to Liquid Recirculating Chiller
§ ~500 Watts of cooling capacity @ 20°C with 20°C facility chilled water
§ Operating Range from 5°C to 50°C
§ Wetted materials: Copper process, Stainless Steel facility
§ Configuration options selected:
- 1G: 1 lpm @ 35 psig magnetic drive gear pump
- 1: US power cord
- R2: RS232 communications
- EF: 5 micron External Filter for process fluid path
- VD: Vibration dampening material added
- AR: Auto Restart software
§ CES-307A Customized features:
- Special Liquid-to-Liquid Heat Exchanger with 2 Stainless Steel Facility Water (House) cold plates, 1 Copper process plate and sealed thermoelectric (TE) modules
- Facility water and Process plumbing is SS and polymers (fittings and tubing)
- 10kΩ Thermistor on Copper Cold Plate for 4°C Pump Fail
- 3/8" female SS NPT process inlet fitting
- 3/8" John Guest process outlet
- 3/8" OD tubing to filter
- 3/8" John Guest to 3/8" NPT on filter inlet
- No fitting on filter outlet (Filter outlet is 3/8" female NPT)
- Facility inlet / outlet fittings are 3/8" female SS NPT
- China RoHS (Special China RoHS label required)
§ Operating Range (Set Point): 5°C to 50°C
§ Ambient Temperature Range: 10°C to 40°C non-condensing
§ Stability / Repeatability: ±0.05°C with constant load (even near ambient)
§ Cooling Capacity (typical): ~500 Watts @ 20°C in 20°C ambient air
§ Noise Level (at 1 meter): < 48 dBA (pump dependent)
§ Recommended Coolant / Process Fluid: Koolance (27% propylene glycol / water mix)
§ Process Fluid Fittings: 3/8" female NPT inlet/outlet fittings
§ Pump: 1 lpm @ 35 psig magnetic drive gear pump
§ Tank volume: 300 ml with level sensor
§ Process Fluid Filter: 5 μm external filter with 3/8' hose from chiller
§ Required Facility Water: 1 gpm recirculated, filtered, treated industrial water, temperature 10 to 25°C, pH 6.5 to 8.2
§ Facility Water Fittings: 3/8" female NPT inlet/outlet fittings
§ Dimensions (L x W x H): 13” x 11” x 13” 4U (32 x 28 x 32 cm)
§ Weight: 28 lbs (13 kg)
§ Power Input: Universal: 115-230 VAC, 50/60 Hz, 7-5 amps max
§ Controls: Digital PID controller for heating and cooling
§ Communications: Keypad or RS232 interface
§ Alarms: Temperature, fluid level, system or component failure (display and RS232 option)
§ Standards: TUV listed to UL, CAN/CSA and EN 61010-1, No CE Mark, RoHS compliant
§ Warranty: 2 years
The information contained on this page is, to our knowledge and information, accurate, but it may contain errors and therefore we do not warrant the completeness or accuracy of the information contained on this page.
Any offer by you to purchase the equipment described on this page shall be subject to our standard terms and conditions of sale.
Established in 1998, SDI has now built up an international network of sales agents and offices.
Click here for all contact information.
SDI-Fabsurplus Srl Italy, and SDI-FABSURPLUS LLC. N. America
If you want to join our mailing list, please send click on the button below to send an e-mail to subscribe to our monthly equipment news update.
Request monthly equipment news
We'd love to get your feedback about our website and our services!
Fill in the Feedback Form