SDI fabsurplus.com is pleased to announce the availability of the following listed used Veeco NT3300 Non Contact Profilometer.
Please click on the "Get Quote" button at the end of the NT3300 description, if you'd like to get a quotation, photos and specifications of this Non Contact Profilometer, and your request for this equipment will be forwarded to our SDI sales representatives automatically.
This Veeco NT3300 Non Contact Profilometer is available for immediate sale.
Crating, refurbishment and delivery for this equipment can be quoted on request.
|Description:||Non Contact Profilometer|
|Version:||6 or 8 inch|
|Sales Condition:||as is all rebuilt|
6 or 8 inch stage.
Completely refurbished to new spec or better
5X and 50 X objectives.
Profiler System Details: NT-3300 Profiler system with computer • 8 inch auto XY with 5 urn encoder/autoII • 0.4X field of view lens • .75X field of view lens • 1.0X field of view lens • 2.0X field of view lens • Quadruple turret motorized operation, position sensing • 1-5X 1-50X A-thermal interferometric objective • High-speed auto-focus - up to 100 microns/second • 10 micron step height standard • Wafer vacuum chuck, 4 inch - 8 inch • Vacuum switch box Features Vertically-scanning interference microscope for three dimensional surface profile measurements, includes: • Standard Vertical Scan Range of 1,000 microns • Phase shifting intereferometric (PSI) and white light vertical scanning (VSI) measurement modes Composite polymer-concrete epoxy-resin base enclosed bridge microscope stand • Superior damping characteristics • Improved rigidity and thermal stability Integrated air-isolation table and electronics enclosure Computer controlled X/Y stage with manual joystick positioning • Low run-out, crossed roller bearing, 8 inch two axis travel, 0.5 micron resolution linear encoders Motorized Z-axis, 8 inch travel, manual hand controller Automated and manual stitching Monochrome 9 inch video monitor for sample viewing and alignment Camera Assembly • CCD solid state array, 736 X 480 pixels • Output: 8 bit digital/RS-170 • User selectable measurement arrays Computer Controller • Dell Pentium, 550 Mhz, 10 GB hard drive, 128 MB RAM • Win XP with WYKO Vision-32 Software • 17 inch SVGA flat panel, keyboard, and track ball, CD-ROM Original Operators and Maintenance Manuals
Short lead time.
The information contained on this page is, to our knowledge and information, accurate, but it may contain errors and therefore we do not warrant the completeness or accuracy of the information contained on this page.
Any offer by you to purchase the equipment described on this page shall be subject to our standard terms and conditions of sale.
Established in 1998, SDI has now built up an international network of sales agents and offices.
Click here for all contact information.
SDI-Fabsurplus Srl Italy, and SDI-FABSURPLUS LLC. N. America
If you want to join our mailing list, please send click on the button below to send an e-mail to subscribe to our monthly equipment news update.
Request monthly equipment news
We'd love to get your feedback about our website and our services!
Fill in the Feedback Form