Fico AMS-LM Mold Press for Sale

-De-installed, warehoused. Either a remote video inspection or a warehouse inspection is available by appointment.
-Was in working condition in the line before removal to warehouse at the end of 2023.
-Includes 3 sets of SRV mold die
-Can also be offered refurbished, in working condition at extra cost.

Cassette Handler
-High capacity
-Freely accessible
-Slot to slot copy
-Two or four deck version
-Bar code, 2D code and RFID reader (optional)

Vision
-Leadframe orientation check
-Mark inspection, bar code and 2D code check
-Optical Character Verification (OCV)

Leadframe Handler
-Automatic orientation correction
-Leadframe pre-heating
-Anti warpage leadframe cooling
-Air cushion transport
-Thin board handling

Molding Press
-High standard clamp force of 600kN (750kN optionally available)
-Recipe controlled deep vacuum level (vacuum as low as 1 torr)
-Recipe controlled venting mechanism
-Large, thick and thin, substrate molding
-Individually controlled clamp cylinders (optimal substrate thickness compensation)
-Dynamic Clamping Control (Selective molding & Flip Chip Exposed Die)
-Even mold cap planarity
-Topedge molding (no bleed with low viscosity compounds)

Pellet Supply
-Remote pellet feed (up to 40m)
- Pellet length check
-Pellet cooling
-Pellet age control

Machine Dimensions
Width    3,145 mm
Depth    1,652 mm
Height    2,197 mm
Weight    Approx. 3,600 kg

Leadframe Dimensions
Width    72 -102 mm
Length    100 - 280 mm
Thickness    0.1 - 1.5 mm
Height    Max. 2 mm

Cassette Dimensions
Width    80 - 120 mm
Length    180 - 300 mm
Height    100 - 165 mm
Storage capacity    800 mm

Supply Requirements
Voltage    208-230-380-400-440-460-480VAC - 3~
Frequency    50 / 60 Hz
Power rating    9 kVA
Compressed air    5 - 10 bar
Average air consumption    6 m3/h at 6 bar
Factory exhaust    300 m3/h at 50 Hz

 
Equipment Performance
Uptime    ≥ 98%
MTBF    ≥ 200 h for every MTTR of 1 h
MTBA    ≥ 3 h
MTTR    ≤ 1 h
MTTA    ≤ 3 min

 
Press and Mold Properties
Max. clamp force    750 kN
Max. mold opening    90 mm
Max. transfer pressure    18 MPa
Pellet diameter    11, 14 or 14.3 mm
Max. number of plungers    10
Max. cavity temperature difference    ± 2 ºC